歡迎來到四機數控機床有限公司官網!
0531-88681424簡體中文ENGLISH
  • 商品名稱: 萬能外圓磨床
  • 產品編號: 0702
  • 產品型號: M1412
  • 瀏覽次數: 17

機床特點:

★本機床適用于中小軸、軸套、法蘭盤類工件外圓柱面、外圓錐面、內孔、內圓錐面及臺肩磨削加工。

★機床砂輪架、頭架、工作臺可以轉動一定角度,且工作臺、砂輪架除液壓驅動外,還可手動。以適應

車間生產或機修

★本機床可采用頂尖、卡盤或彈簧卡頭裝夾工件

技術規格:TECHNICAL SPECIFICATIONS

中心高Height of center                                                            100mm

頂尖距Distance between centers                                               370/520mm

磨削直徑Diameter to be ground                                                   φ5-φ125mm

最大磨削長度Max. length to be ground                                         350/500 mm                                                      

磨削孔徑Aperture to be ground                                                     φ10-φ40

最大磨削孔深Max. depth to be ground                                                  50

工作臺回轉角度Table rotation angle                                            ± /± 

頭架的回轉角度Rotation angle of headstock                                   ± 45°

砂輪架回轉角度Rotation angle of grinding wheel rack                                   ± 180°

最大工件重量Max. weigth of workpiece                                                10kg

砂輪尺寸Dimensionof Max. grinding wheel                              φ300×(20-40)×φ127mm

砂輪線速度Linear speed of grinding wheel                                            ≤35m/s                                                 

砂輪架電機功率Motor power of grinding wheel rack                                     2.2kw

機床外形尺寸Outline dimension of machine tool

                                             1770×1190×1600/  2240×1190×1600mm

凈重  Net weight

                                                            1900/2100 Kg

毛重  Gross weight                                                           2000/2200 Kg

             

 

 

 

工作精度:WORKING ACCURACY(磨削國家標準試磨件)

                                              

圓度 :頂尖磨外圓           0.0015 mm

      卡盤磨外圓           0.0025 mm

      卡盤磨內圓           0.0025 mm

圓柱度          0.005 mm

表面粗糙度      Ra:0.32μm

 

 

 

 

 

 

平面布置圖

1. 機高度1300mm

2. 機床應安裝在遠離震源的堅固基礎上,用機床底下的3塊墊鐵來調整安裝水平。用水平儀檢查機床的水平性。縱向≤0.04/1000,橫向≤0.04/1000,當機床調整完畢后,可加入必要的輔助墊鐵,注入混凝土固定

青春娱乐视频精品99